Features
• Core: Arm® 32-bit Cortex®-M7 CPU with FPU,adaptive real-time accelerator (ARTAccelerator) and L1-cache: 8 Kbytes of datacache and 8 Kbytes of instruction cache,allowing 0-wait state execution from embeddedFlash memory and external memories,frequency up to 216 MHz, MPU,462 DMIPS/2.14 DMIPS/MHz (Dhrystone 2.1)and DSP instructions.
• Memories
– Up to 512 Kbytes of Flash memory withprotection mechanisms (read and writeprotections, proprietary code readoutprotection (PCROP))
– 528 bytes of OTP memory
– SRAM: 256 Kbytes (including 64 Kbytes ofdata TCM RAM for critical real-time data) +16 Kbytes of instruction TCM RAM (forcritical real-time routines) + 4 Kbytes ofbackup SRAM (available in the lowestpower modes)
– Flexible external memory controller with upto 32-bit data bus: SRAM, PSRAM,SDRAM/LPSDR SDRAM, NOR/NANDmemories
• Dual mode Quad-SPI
• Clock, reset and supply management
– 1.7 V to 3.6 V application supply and I/Os
– POR, PDR, PVD and BOR
– Dedicated USB power
– 4-to-26 MHz crystal oscillator
– Internal 16 MHz factory-trimmed RC (1%accuracy)
– 32 kHz oscillator for RTC with calibration
– Internal 32 kHz RC with calibration
• Low-power
– Sleep, Stop and Standby modes
– VBAT supply for RTC, 32×32 bit backupregisters + 4 Kbytes of backup SRAM
• 3×12-bit, 2.4 MSPS ADC: up to 24 channelsand 7.2 MSPS in triple interleaved mode
• 2×12-bit D/A converters
• Up to 18 timers: up to thirteen 16-bit (1x lowpower 16-bit timer available in Stop mode) andtwo 32-bit timers, each with up to 4IC/OC/PWMs or pulse counter and quadrature(incremental) encoder inputs. All 15 timersrunning up to 216 MHz. 2x watchdogs, SysTicktimer
• General-purpose DMA: 16-stream DMAcontroller with FIFOs and burst support
• Debug mode
– SWD and JTAG interfaces
– Cortex®-M7 Trace Macrocell™
• Up to 140 I/O ports with interrupt capability
– Up to 136 fast I/Os up to 108 MHz
– Up to 138 5 V-tolerant I/Os
• Up to 21 communication interfaces
– Up to 3× I2C interfaces (SMBus/PMBus)
– Up to 4 USARTs/4 UARTs (27 Mbit/s,ISO7816 interface, LIN, IrDA, modemcontrol)
– Up to 5 SPIs (up to 54 Mbit/s), 3 withmuxed simplex I2Ss for audio classaccuracy via internal audio PLL or externalclock
– 2 x SAIs (serial audio interface)
– 1 x CAN (2.0B active)
– 2 x SDMMCs
• Advanced connectivity
– USB 2.0 full-speed device/host/OTGcontroller with on-chip PHY
– USB 2.0 high-speed/full-speeddevice/host/OTG controller withdedicated DMA, on-chip full-speedPHY and on-chip Hi-speed PHY orULPI depending on the part number
• True random number generator
• CRC calculation unit
• RTC: subsecond accuracy, hardwarecalendar
• 96-bit unique ID
You can get your ST STM32F722IET6 solution by flling out the form below and we will contact you immediately.