logologo

Language
Search...

logo

Products

Products

Home > Products > ST MICROELECTRONICS > STM32

STMicroelectronics STM32F407VGT6

The STM32F407VGT6 is a high-performance microcontroller from STMicroelectronics, built around the Arm® Cortex®-M4 core with a floating-point unit (FPU). Operating at frequencies up to 168 MHz, it delivers 210 DMIPS and incorporates the Adaptive Real-Time Accelerator (ART Accelerator™) for zero-wait state execution from Flash memory. The device features up to 1 Mbyte of Flash, 192+4 Kbytes of SRAM (including 64 Kbytes of core-coupled memory), 512 bytes of OTP memory, and a flexible static memory controller supporting Compact Flash, SRAM, PSRAM, NOR, and NAND memories. A rich set of peripherals includes three 12-bit ADCs (up to 7.2 MSPS in triple interleaved mode), two 12-bit DACs, up to 17 timers, and a wide range of communication interfaces. Advanced connectivity is provided by a 10/100 Ethernet MAC with IEEE 1588v2 hardware support, USB 2.0 OTG full-speed with on-chip PHY, USB 2.0 OTG high-speed with ULPI, two CAN interfaces, an SDIO interface, and multiple USARTs, I2Cs, and SPIs.

Features:

• Core: Arm® 32-bit Cortex®-M4 CPU with FPU,Adaptive real-time accelerator (ARTAccelerator) allowing 0-wait state executionfrom Flash memory, frequency up to 168 MHz,memory protection unit, 210 DMIPS/1.25 DMIPS/MHz (Dhrystone 2.1), and DSPinstructions

• Memories

– Up to 1 Mbyte of Flash memory

– Up to 192+4 Kbytes of SRAM including 64-Kbyte of CCM (core coupled memory) dataRAM

– 512 bytes of OTP memory

– Flexible static memory controllersupporting Compact Flash, SRAM,PSRAM, NOR and NAND memories

• LCD parallel interface, 8080/6800 modes

• Clock, reset and supply management

– 1.8 V to 3.6 V application supply and I/Os

– POR, PDR, PVD and BOR

– 4-to-26 MHz crystal oscillator

– Internal 16 MHz factory-trimmed RC (1%accuracy)

– 32 kHz oscillator for RTC with calibration

– Internal 32 kHz RC with calibration

• Low-power operation

– Sleep, Stop and Standby modes

– VBAT supply for RTC, 20×32 bit backupregisters + optional 4 KB backup SRAM

• 3×12-bit, 2.4 MSPS A/D converters: up to 24channels and 7.2 MSPS in triple interleavedmode

• 2×12-bit D/A converters

• General-purpose DMA: 16-stream DMAcontroller with FIFOs and burst support

• Up to 17 timers: up to twelve 16-bit and two 32-bit timers up to 168 MHz, each with up to 4IC/OC/PWM or pulse counter and quadrature(incremental) encoder input

• Debug mode

– Serial wire debug (SWD) & JTAGinterfaces

– Cortex-M4 Embedded Trace Macrocell™

• Up to 140 I/O ports with interrupt capability

– Up to 136 fast I/Os up to 84 MHz

– Up to 138 5 V-tolerant I/Os

• Up to 15 communication interfaces

– Up to 3 × I2C interfaces (SMBus/PMBus)

– Up to 4 USARTs/2 UARTs (10.5 Mbit/s, ISO7816 interface, LIN, IrDA, modem control)

– Up to 3 SPIs (42 Mbits/s), 2 with muxedfull-duplex I2S to achieve audio classaccuracy via internal audio PLL or externalclock

– 2 × CAN interfaces (2.0B Active)

– SDIO interface

• Advanced connectivity

– USB 2.0 full-speed device/host/OTGcontroller with on-chip PHY

– USB 2.0 high-speed/full-speeddevice/host/OTG controller with dedicatedDMA, on-chip full-speed PHY and ULPI

– 10/100 Ethernet MAC with dedicated DMA:supports IEEE 1588v2 hardware, MII/RMII


How to Order

You can get your STMicroelectronics STM32F407VGT6 solution by flling out the form below and we will contact you immediately.

Want to turn your idea into reality Contact AXTEK Support
Copyright © 2022 AXTEK Technology Co., Ltd. All Rights Reserved. | Sitemap

Contact

Copyright © 2022 AXTEK Technology Co., Ltd. All Rights Reserved. | Sitemap
Online

Email

Message
TOP