logologo

Language
Search...

logo

Products

Products

Home > Products > Featured Manufacturers > Others

TI DRV8889QWRGERQ1 STOCK

The DRV8889-Q1 and DRV8889A-Q1 are fully integrated stepper motor drivers capable of supporting up to 1.5A full-scale current, equipped with an internal microstepping indexer, smart tune decay technology, an advanced stall detection algorithm and integrated current sensing. The devices support up to 1/256 microstepping for smooth motion profiles, and integrated current sensing eliminates the need for two external resistors, saving board space and cost. With the advanced stall detection algorithm, designers can detect whether the motor has stopped running and take action as needed, improving efficiency and reducing noise. The devices offer eight decay mode options, including smart tune, slow and mixed decay options, and smart tune technology automatically adjusts to achieve optimal current regulation performance. An integrated torque DAC allows the controller to adjust the output current via SPI without adjusting the VREF voltage reference, and a low-power sleep mode is provided via the

Description:

The DRV8889-Q1 and DRV8889A-Q1 are fully integrated stepper motor drivers capable of supporting up to 1.5A full-scale current, equipped with an internal microstepping indexer, smart tune decay technology, an advanced stall detection algorithm and integrated current sensing. The device supports up to 1/256 microstepping for smooth motion profiles. Integrated current sensing eliminates the need for two external resistors, saving board space and cost. With the advanced stall detection algorithm, designers can detect whether the motor has stopped running and take action as needed, improving efficiency and reducing noise. The device offers eight decay mode options, including smart tune, slow and mixed decay options. Smart tune technology automatically adjusts to achieve optimal current regulation performance. The device also includes an integrated torque DAC that allows the controller to adjust the output current via SPI without adjusting the VREF voltage reference. The device provides a low-power sleep mode via the nSLEEP pin. The device features full-duplex, 4-wire synchronous SPI communication and allows up to 63 devices to be daisy-chained for configurability and detailed fault reporting. View our entire family of stepper motor drivers on ti.com.


Features:


AEC-Q100 qualified for automotive applications


Up to 1/256 microstepping


Integrated current sensing – no sense resistors required


Smart tune decay technology, fixed slow and mixed decay options


4.5V to 45V operating supply voltage range


Pin-to-pin RDS(ON) variants: - DRV8889/A-Q1: 900mΩ HS + LS at 25°C - DRV8899-Q1: 1200mΩ HS + LS at 25°C


High current capacity per bridge – DRV8889/A-Q1: 2.4A peak, 1.5A full scale – DRV8899-Q1: 1.7A peak, 1A full scale


TRQ_DAC bits for adjusting full-scale current


Configurable off-time PWM chopping


Simple STEP/DIR interface


SPI with daisy-chain support


Low-current sleep mode (2μA)


Programmable output slew rate


Programmable open-load detection time with DRV8889A-Q1


Spread-spectrum clocking to minimize EMI


Protection features – VM undervoltage lockout – Overcurrent protection – Stall detection – Open-load detection – Over-temperature warning and shutdown – Under-temperature warning – Fault condition indication pin (nFAULT)


Functional safety available – Documentation to aid functional safety system design


Applications:


Automotive bipolar stepper motors


Headlight position adjustment


Head-up displays (HUD)


HVAC stepper motors


Electronic fuel injection (EFI)


How to Order

You can get your TI DRV8889QWRGERQ1 STOCK solution by flling out the form below and we will contact you immediately.

Want to turn your idea into reality Contact AXTEK Support
Copyright © 2022 AXTEK Technology Co., Ltd. All Rights Reserved. | Sitemap

Contact

Copyright © 2022 AXTEK Technology Co., Ltd. All Rights Reserved. | Sitemap
Online

Email

Message
TOP