GENERAL DESCRIPTION:ISSI eMMC products follow the JEDEC eMMC 5.0 standard. It is ideal for embedded storage solutions for Industrialapplication and automotive application, which require high performance across a wide range of operating temperatures.eMMC encloses the MLC NAND and eMMC controller inside as one JEDEC standard package, providing a standardinterface to the host. The eMMC controller directly manages NAND flash, including ECC, wear-leveling, IOPS optimizationand read sensing.
FEATURES:
• Packaged NAND flash memory with eMMC 5.0 interface
• IS21/22ES08G: 8Gigabyte
• Compliant with eMMC Specification Ver.4.4, 4.41,4.5,5.0
• Bus mode
- High-speed eMMC protocol
- Clock frequency: 0-200MHz.
- Ten-wire bus (clock, 1 bit command, 8 bit data bus) and a hardware reset.
• Supports three different data bus widths : 1 bit(default), 4 bits, 8 bits
- Data transfer rate: up to 52Mbyte/s (using 8 parallel data lines at 52 MHz)
- Single data rate : up to 200Mbyte/s @ 200MHz (HS200)
- Dual data rate : up to 400Mbyte/s @ 200MHz (HS400)
• Operating voltage range :
- VCCQ = 1.8 V/3.3 V
- VCC = 3.3 V
• Supports Enhanced Mode where the device can be configured as pseudo-SLC (pSLC) for higherread/write performance, endurance, and reliability.
• Error free memory access
- Internal error correction code (ECC) to protect data communication
- Internal enhanced data management algorithm
- Solid protection from sudden power failure, safe-update operations for data content
• Security
- Support secure bad block erase and trim commands
- Enhanced write protection with permanent and partial protection options
• Field Firmware Update(FFU)
• Boot Partition and RPMB Partition
• Enhanced Device Life time
• Pre EOL information
• Production State Awareness
• Power Off Notification for Sleep
• Temperature range
- Industrial Grade : -40 ℃ ~ 85 ℃
- Automotive Grade (A1): -40 ℃ ~ 85 ℃
- Automotive Grade (A2): -40 ℃ ~ 105 ℃
• Quality
- RoHS compliant (for detailed RoHS declaration, please contact your representative.)
• Package
- 153 FBGA (11.5mm x 13mm x 1.0mm)
- 100 FBGA (14.0mm x 18.0mm x 1.4mm)
You can get your ISSI IS21ES08GA-JCLI solution by flling out the form below and we will contact you immediately.